The Lucas M45G inertia type starter motor was used on many 1950's and 1960's era classic vehicle engines fitted to
BMC, Landrover, Austin, Morris,British Leyland, Lister, Ford, Jaguar, Rover, Vauxhall, applications.
Perkins 4108 Industrial , agricultural vehicle, and marine diesel engine applications.
M45G inertia type starter motor variants can be identified by part no, dimensions, and no. of pinion teeth.
The M45G motor casing has a diameter of 4.5 inches
M45G starter motors are available as 12 volts or 24 volts versions.
Lucas factory exchange remanufactured starter motors may have been designated as part of the B90 range.
A range of Brand New and Service Exchange M45G type Starter Motors is available for petrol or diesel engines.
Core unit in stock
Electrical breakdowns
Call 07703 558610 for starter motor supply enquiries
We supply a wide range of starter motor components to allow rebuild of your Lucas type M45G inertia starter motor.
If you require starter motor parts please state manufacturers part numbers of the starter motor found on unit the casing.
Minimum order value of £12 applies for starter motor components
Armature
Bushes and Bearings
Carbon Brushes
Brush Springs
Brush Gear
Commutator End (CE) Bracket
Drive End (DE) Casting
Field Casing / Yoke
Field Coil winding
M45G Starter Pinion Drive Gear
M45G Bendix Spring
Battery Cables: Starter Solenoid Cables
Chassis ground cables
Terminals
Lucas Part No | Voltage | kW | Drive teeth | Rotation | Cross ref | Applications |
---|---|---|---|---|---|---|
M45G | 12v | 2.1kW | 13t | CW | Generic | |
LRS189 | 12v | 2.1kW | 13t | CW | Perkins 4108 industrial engine starter motor | |
26126 | 12v | 2.1kW | 13t | CW | ||
26156 | 12v | 2.1kW | 13t | CW | ||
26163 | 12v | 2.1kW | 13t | CW | ||
26165 | 12v | 2.1kW | 13t | CW | ||
26249 | 12v | 2.1kW | 13t | CW | ||
26373 | 12v | 2.1kW | 13t | CW | ||
27404 | 12v | 2.1kW | 13t | CW |
Armature : Lucas 54251052, Lucas TIB112, HC131654
Field Coils : TEB134, HC130194, TEB132, HC130196
Terminal Bolt : HC138138
Brass Terminal Nut 1/4" BSF : HC137532
Brushes : HCLASX 15-274
Brush Spring : HC132209
CE Bracket : HC136118
Split pin retaining pinion assembly : HC191575
Pinion : HC131724
Pinion Spring : 270889, TLB172, TLB174
Drive end armature shaft bush : HC140746 OD:25.5mm ID:22.35mm L:33.6mm
Commutator end armature shaft bush : HC140053 OD:19.15mm ID:15.99mm L:18.9mm
Remote Solenoid: Lucas 76411, 76415, 76417, 76425, 76426, 76445, 76450, 76465, 76470, 76471, 76485, 76486, HC130872, WASND152
Oem names used for reference purposes only. All trademarks are property of their respective owners. Replacement parts may be non genuine aftermarket equipment.
Unit Warranty may be voided by oil fuel or coolant leaks on to the starter motor.
Warranty may be voided by overload due to hydraulic pumps permmanently engaged resulting in
additional excessive load.